How To Measure For Blinds And Shades In Your Home
Whether you’re getting blinds or shades for the home, you need to measure and size the window properly in order to ensure that your custom window dressings will fit when you put them up. Accurate measurements for your shades and blinds midlothian guarantees that your windows will look beautiful.
But in order to do that you need to know how to measure the windows so you have the most precise dimensions for the window treatments you plan to install. Just be sure your measurements are exact or you could end up with a set of blinds or shades that don’t fit and don’t look right. If that happens you’ll need to get replacements and when you’re dealing with custom jobs, that can take a lot of time and money you didn’t need to spend.
So here are the essentials you need to consider when you are measuring windows for blinds and shades:
Choose Your Window Treatment
First things first, you need to decide on the type of window treatments you plan to put in. You certainly have a multitude of options out there and, when it comes to blinds and shades, you may find yourself a little overwhelmed by all of the selections available.
As you are deciding on the option you like best for your home, you also need to consider whether you will be using an inside or outside mount for your window treatments.
Measuring the Window
Once you know if you’re going with an inside or outside mount, you can then measure accordingly. For inside mounts you need to focus on measuring the inside of the window frame at three places across the width and the height for accuracy. For outside mounts, measure the area of the window that you want to be covered by your blinds or shades.
When you take down your measurements, always mark it down to the nearest 1/8 inch. If your round up to a half or even a whole inch your measurements will be off and the blinds or shades won’t fit properly. You should also take care not to transpose your measurements.
Writing down your measurements should be done in a uniform manner where the width is shown first followed by the height. So if your window is 47 inches wide and 57 inches high, you would mark it down as 47×57.
Some Helpful Tips
The tape you use to measure matters. Always go with a steel measuring tape as opposed to using a cloth measuring tape. The reason being that a steel measuring tape is far more precise than the cloth versions. In addition, when you are submitting your measurements to custom window treatments manufacturer be sure the width and height are well marked. You may have written the two measurements in the order as described above, but writing down two numbers instead of adding “W” or “H” can lead to confusion and problems that are all too easy to avoid by just delineating the two measurements from one another.